Follow us on
Macroza Facebook Macroza You Tube Macroza Flickr Macroza Vimeo
 
Products > Milling cutter Wall Chasers > Maintenance

KEEPING YOUR WALL CHASER WELL SERVICED WILL EXTEND THE LIFE OF YOUR EQUIPMENT.

We strongly recommend that all maintenance of our Wall Chasers is carried out at an official Macroza Technical Service Centre.

Regular maintenance should be done to ensure best performance on your wall chaser.

Daily maintenance.



Milling Cutter Sharpening
Check state of milling cutter’s Tungsten Carbide tips approximately after one hour of use and change the cutter if blunt.
Wall Chaser cleaning
After work, clean the wall chaser removing all traces of dust. If necessary, blow shots of compressed air through the machine’s ventilation slots to remove remaining dust.


Monthly maintenance

All MACROZA Wall Chasers used on daily basis should be checked at least once a month.

Bearings:
It is very important to check if there is any play in the bearings. At the slightest play we strongly recommend change bearings Failure to do so may lead to severe failures in the machine engine.

In normal working conditions and due to the harsh nature of the chasing job, it may be necessary to change the bearings each month.

Carbon brushes:
Look through the chaser’s lateral ventilation slots to check whether there are sparks produced by the carbon brushes in the coil. If necessary replace carbon brushes. Always replace the pair of carbon brushes.


For other wall chaser’s spare parts there are no maintenance period defined. They will be replaced as necessary.

MACROZA Tool Kit

We strongly recommend use our MACROZA Tool Kit.

At Macroza we have developed a new tool set especially designed to open & repair our machines in an easy, fast and safe way.

Each single piece of tool has been developed to be able to service all parts of our wall chasers without damaging the body case.

This tool set has been long used at our assembly plant and our own technical services. Now, we bring it to our network of authorized network of technical services in Spain and to our distributor network internationally.


AFTER-SALES SERVICE FOR YOUR MACROZA

MACROZA has an Official Technical Service Centre network to provide you with excellent service and fast repairs.

Use always original MACROZA spare parts. Use of non-original MACROZA spare parts may lead to machine damage and will be considered a breach of MACROZA’s warranty terms.

Macroza S.L. | C/ Leñeros 15 - 28039 Madrid | Tel: (+34) 91 541 92 94 | Fax: (+34) 91 542 86 08
Legal Disclaimer
Copyright 2013 Macroza | Wall Chasers
Macroza Facebook Macroza You Tube Macroza Flickr Macroza Vimeo